Saving energy in plastics extrusion: from insulation to one's own combined heat and power plant

Press Releases, Trends

Troisdorf, 02.07.2013. Plastics extrusion produces every year tons of films, filaments and other products for the food industry, hygiene or medicine. In recent years the demand for sustainability has risen, especially for products in the consumer sector. If one considers the entire life cycle of the products, it quickly becomes clear: A transition to solely alternative raw materials is not a viable solution for the future. Those wishing to produce sustainably and reduce the energy consumption and CO2 immissions will have to begin with production processes: The respective solutions for greener plastics extrusion processes are already available. The Reifenhäuser Group, the worldwide leading manufacturer of plastics extrusion lines and components, is offering with its Blue Extrusion program a range from small measures such as insulation up to large measures such as made-to-order combined heat and power plants.

The Reifenhäuser Group recognized early on the necessity for sustainable production and has reacted accordingly. Ralf Pampus, responsible for the subject of Blue Extrusion within the Reifenhäuser Group, said: "We estimated our energy consumption earlier the way many continue to today. But we were no longer satisfied with this. Our specifications today are based on measurements. We know precisely how much energy we consume and crucially: We know where we consume energy. This way, we can target those areas where our measures have the greatest potential." The following examples of Blue Extrusion measures show how this strict approach has paid off, especially for the customers of the Reifenhäuser Group:

Heating: It does not always have to be electric

Reifenhäuser REICOFIL, specialist for nonwoven lines, offers its customers for instance an alternative heating concept. With conventional electric heating, the degree of efficiency is just about 31 percent. Those who instead use natural gas for the heating of melt-blown pressure hot air, calenders and dryers can increase the degree of efficiency up to 90 percent and thus save twice: The CO2 immissions for a 3.2 meter wide six-beam system can be sunk by approx. 14 percent with the alternative heating. At the same time, producers save energy costs. The large savings varies greatly from country to country due to the different prices for electricity and gas – but in all cases worthwhile.

Possible potential savings for a six-beam nonwoven system based on the different prices for electricity and natural gas in the USA, Germany and Saudi Arabia Possible potential savings for a six-beam nonwoven system based on the different prices for electricity and natural gas in the USA, Germany and Saudi Arabia

Saving raw material through high level of automation and sophisticated features

Saving of raw materials allows a more sustainable and more economically efficient production. In plastics extrusion, raw material costs normally account for about 80 percent of the complete production costs. Thanks to a high level of automation of its lines, Reifenhäuser reduces set-up times and thus waste material. The start-up assistant from Reifenhäuser Kiefel Extrusion, for instance, reduces the start-up time after product changes by 50 percent. Producers producing 500 kgs/h on 300 days a year, and requiring about two new starts a week, can save 11,000 kgs per year, corresponding to 15,000 euro per year. They can even save more using the product change assistant which, thanks to pre-defined sequences, enables an automatic product change that is much faster than the manual mode. The change-over time can be reduced by up to 70 percent which corresponds to savings in raw material of 50,000 kgs per year.

Combined heat and power from one's own plant

If a part of the power is produced on one’s own, the arising waste heat can be used for operating the system. Combined heat and power plants, which can be laid out individually for each customer and their plastics extrusion lines, make this possible. Producers can thus achieve over 90 percent total degree of efficiency under optimum conditions, because the waste heat can be targeted for use at different temperature levels. In the case of nonwoven lines, high temperatures can be utilised for instance for generating melt-blown pressure hot air or for heating calenders and dryers. The waste heat from lower temperature levels is suited for pre-heating of process air or secondary air, for room heating or – when using absorption refrigeration – even for process cooling or the air conditioning of a building. By producing their own electricity, producers are prepared for the otherwise expensive load peaks.

 Utilisation of waste heat from a combined heat and power plant with the example of a nonwoven line Utilisation of waste heat from a combined heat and power plant with the example of a nonwoven line

Beyond fossil fuels such as heating oil or natural gas, combined heat and power plants can also be operated with renewable fuels such as plant oils or biogas. This makes producers more independent from fossil fuels and raises the local return on investment, depending on location. In combination with the high total degree of efficiency, the CO2 balance of the line can thus be significantly improved. Producers using combined heat and power produce not only with less resources and thus more sustainably, but can also cut their production costs. The possibilities for savings depend on many factors, such as price for the raw materials, the total energy need of the line or the government subsidisation of combined heat and power plants. The interplay with nonwoven lines allows the investment in a combined heat and power plant in many cases to be amortised within less than two years. The total annual savings potential is then more than 700,000 euro. The concept is generally transferable to all plastics extrusion lines.

Interested parties can find further information about Blue Extrusion and the concrete measures behind it at the K 2013. The Reifenhäuser Group will be there with all business units together at stand C22, hall 17.


Blue Extrusion:Selected sustainable measures of the Reifenhäuser Group

  • An energy efficiency package such as:
    • Housing
    • Additional insulation
  • Down Gauging
  • Development of systems technology for
    • Processing renewable raw materials such as PLA and Lyocell
    • Processing of 100% recycling material
  • Concept for the utilisation of combined heat and power plants for supplying production lines with electricity and heat
  • Heating with gas instead of electricity
  • Use of energy efficient motors of highest energy efficient class
  • Use of frequency-stabilized pumps
  • Energy savings through optimized low-temperature screws for all kinds of polyolefins and barrier products
  • Refitting cooling units with climate compatible refrigerating agents
  • Recycling braking energy of rotating masses
  • Heat recovery from exhaust air
  • Stretching using initial heat
  • Waste reduction, for instance with a high level of

Your contact

Careers

Petra Seeland

Head of HR Department

+49 6241 902-266 petra.seeland@reifenhau...

Press

Wolfgang H. Högemann

Public Relations

+49 2241 23510-768 wolfgang.hoegemann@reif...

Products

Eugen Friedel

Director Sales

+49 6241 902 184 eugen.friedel@reifenhau...

Purchasing

Babette Krall

Purchasing Manager

+49 6241 902-235 babette.krall@reifenhau...

Research & Development

Dr. Holger Schumacher

Head of Application Technology

+49 2241 481-244 holger.schumacher@reife...

Service

Amador Miano

Head of After Sales Service

+49 6241 902 368 +49 6241 902 173 amador.miano@reifenhaus...

Reifenhäuser GmbH & Co. KG
Maschinenfabrik

Milano Office
Via Trentacoste 9
20134 Milano
Italy

P +39 02 2150054

Reifenhauser Incorporated

12260 W 53rd Street North
Maize KS 67101
USA

P +1 316 260-2122
F +1 316 260-8033

Reifenhauser Plastic Machinery (Suzhou) Co. Ltd.

No. 2 Ousheng Road, Zhong Lu Ecological Park, Pingwang Town, Wujiang District, Suzhou
Post Code: 215221
Jiangsu, VR China

P +86 512 65686036
F +86 512 65686031

Reifenhäuser
Private Ltd.

Asian Pacific Headquarter
25 International Business Park
#04-72 German Centre
Singapore 609916

P +65 65628740
F +65 65636136

Reifenhäuser (India)
Marketing Ltd.

229, Udyog Bhavan
Sonawala Road, Goregaon (East)
Mumbai 400 063
India

P +91 22 2686 2711
F +91 22 2686 2722

Reifenhäuser GmbH & Co. KG
Maschinenfabrik

Moscow Office
Pokrovsky Boulevard, 14/6-8
109028 Moscow
Russia

P +7 495 956 75 77
P +7 495 917 54 55
F +7 495 956 47 02

Reifenhäuser GmbH & Co. KG
Maschinenfabrik

Manila Office
Lot 17, Block 56, Francisco Reyes St.
Garden Abelardo Homes, BF Homes
Paranaque City 1718
Manila
Philippines

P +63 24033395

Reifenhäuser Latina S.A.

Miguel Claro 195, Of. 207
Providencia Santiago,
Chile

P +56 2 25847292

Reifenhäuser Private Ltd.

Ho Chi Minh City Office
9th Fl., Maritime Bank Tower
180 - 192 Nguyen Cong Tru
Nguyen Thai Binh Ward Dist.1
Ho Chi Minh City
Vietnam

P +84 8 62879137
F +84 8 62884691

Reiloy Metall GmbH

Istanbul Office
Atakent Mah – 243 Sok,
TEMA Istanbul
6/B Daire 31
34307 – kücükcekmece – Istanbul
Turkey

Reiloy USA

12260 W 53rd Street North
Maize, KS67101
USA

P +1 800 247 1144
P +1 316 721 1144
F +1 316 721 1495

Reifenhäuser Blown Film

Cornelius-Heyl-Strasse 49
67547 Worms
Germany

P +49 6241 902-0
F +49 6241 902-100
info@reifenhauser-bf.com

  • Group of companies
Subsidiaries