Produce 10 µm films for HDPE garbage bags today and 250 µm barrier thermoforming film tomorrow. EVO 3- to 11-layer blown film lines are suitable for universal applications. Stay flexible in the choice of your product range, but keep one thing constant: the quality.
Our reversing and stationary haul-off units can be adapted to the different film applications individually. To fulfill highest quality demands, use our EVO Ultra Flat module with integrated film flattening unit.
High performance and quality are not mutually exclusive. This is proven by our EVO Ultra Cool high-capacity cooling system, which makes die factors larger than 2 possible. The operation stays as easy as with our alternative blister inner and outer cooling systems, of which various versions are available.
EVO winders stand for consistent reel quality from the first to the last meter of film - frequently without edge trimming. Thanks to our preconfigured winding settings, the handling is easy. Two versions of the EVO film winders are available: EVO W-S contact winder and EVO W-P contact/center/gap winder. We offer winding and reel handling systems for both types - from manual control to fully automatic solutions with cycle times of less than 5 minutes.
Achieve outstanding basic tolerances, precise individual layer thicknesses and offer utmost flexibility with short startup and changeover times. Our blown film die heads enable the production of diameters up to 2500 mm for 5-layer lines and up to 800 mm for barrier lines.
Our EVO C automation system has been developed in cooperation with line operators from all over the world. The system has been inspired by modern smartphones. The operation is intuitive and assistance systems for starting up and shutting down the system or for product changes increase the system automation and prevent operating errors.
Flexibly process almost all raw materials that are suitable for blown films. Thanks to the high quality of the integrated Reiloy screws and cylinders, you can achieve the widest possible performance range with only one extruder type.
More information on Reifenhäuser extruders is available from our affiliate company Reifenhäuser Cast Sheet Coating.
Layers
3 to 5
Die diameters
120-800 mm
Hall-off unit
Oscillating with air turning bars, flattening device and stretching device
Winder
Contact and gap winder with center drive, designed as single-station or double-station winders
Layers
5, 7, 9, 11
Die diameters
300-800 mm
Hall-off unit
Oscillating with air turning bars, flattening device and stretching device
Winders
Surface or gap winders with center drive, designed as single-station or double-station winders
Maximum reel diameter: 1,200 mm, in special cases up to 1,500 mm.
Maximum winding speed: 300 m/min
The EVO S contact winder is ideal for products that are easy to wind, such as flexible packaging films, FFS film tubes for heavy-duty sacks or greenhouse films and mulching films. Depending on the winder design, the max. film width is 1,000-5,800 mm.
The EVO S contact winder is ideal for products that are easy to wind, such as flexible packaging films, FFS film tubes for heavy-duty sacks or greenhouse films and mulching films. Depending on the winder design, the max. film width is 1,000-5,800 mm.